EasyUC
4.9.49

EasyUC Engineer

Change phone descriptions via CSV

Bulk change with preview, targeted approval, conflict check and read-back of every change.

EasyUC · Version 4.9.49

In EasyUC: Massenänderungen

What it is for

With a CSV file you change the descriptions of up to 250 phones in one job. Engineer first reads the current values, shows before and after, and writes only after your approval.

Prerequisites

  • A connection with Schreibaktionen erlauben enabled and CUCM write permissions.
  • A CSV with exactly the columns name and description, separated by comma or semicolon.

Step by step

  1. Open Massenänderungen and paste the CSV or import the file (step CSV vorbereiten). Example line: SEP001122334455,Reception Berlin.
  2. In the Vorschau prüfen (check preview) step, review the current CUCM values and the planned new descriptions. The preview writes nothing and is valid for 30 minutes.
  3. In the Gezielt freigeben (approve explicitly) step, confirm the preview and enter the connection label. Then start the run.
  4. Follow progress and result under Aufträge.

Fields and options

Fields and options
Field / actionMeaning and use
namePhone name, treated as text (leading zeros are kept).
descriptionNew description. Other columns are rejected.
LimitsAt most 250 phones per job. A started plan cannot be run again; changes to the connection profile invalidate a preview.

Check the result and narrow down errors

  • Immediately before each change, Engineer reads the CUCM value again. If it differs from the preview, the phone is skipped as a conflict.
  • After each write call, the result is read back and shown in the job.

Related chapters